What is included in the Dolphin Alavo Mirror System?

Assign one project name or the same project name to several systems which can be grouped when it comes to quoting.

Depending on the space measurements you must work with, choose system installation options from wall to wall or with end panels showing. Visible ends will be installed with décor end panels specified to your preference. There are four options to choose from:

• Wall to wall / Recess – No ends visible
• In right hand corner – left end visible
• In right hand corner – left end visible
• On flat wall – both ends visible

This form refers to the recess area. Specify the available width for the system. Recommended 25mm clearance gaps are included at each end of the system.

Specify the number of washstations required for users. Keep in mind the washstation width is decided at a later stage in this process and will also determine how many modules (cabinets) will cover the specification. Choose washstation quantity or click on the support tab to help you decide.

Select an overall system height. 1000mm is standard and is the most popular choice, but you can choose to go down to 800mm. The system can extend to 1200mm if the design has high ceilings.

A diagram displays a front view and cross-section of what your Alavo system currently looks like and gives you various options to choose between the following appliances:

Tap type

• Integrated (tap is placed within the system and is not visible)
• Floating
• Panel mounted
• Counter mounted
• No tap

Soap

• Soap dispenser
• No soap dispenser

Dyers / Towels

• Dryers
• Dryers +
• Towels
• Dryers and Towels (dryer positioned left of tap and soap dispenser, towels positioned right of tap and soap dispenser)
• Towels and dryers (towels positioned left of tap and soap dispenser, dryer positioned right of tap and soap dispenser)
• Towels and dryers +
• No dryers or towels

In this form, you would specify the washstation module and width from four options:

• No additional modules
• Left additional module
• Right additional module
• Additional module both ends

Additional modules can be added either side of the washstation module to extend the mirror or fill a recess space.

The system width is the final width of the unit from left to right and ranges between 950mm to 1250mm. The form provides a slider to toggle between these measurements.

The mirror offset can be adjusted at this stage also providing a slider to toggle between the measurements.

Use the comparison diagram to select which model of Alavo best suits your needs. Alavo Premium is the crème de la crème whereas Alavo Lite is a simple classic design providing fundamental characteristics.

Should you wish to incorporate soft lighting around your Alavo system to give it that magnificent glow, select the edges to install the halo lighting on (up, down, sides, all-round), or choose no lighting for a simple classic look.

Select a yes or no option to include lighting in the mirror. The diffused LED panels illuminate the user whilst standing in front of Alavo and are placed on either side of each washstation.

A TMV3 and POU Heater option is available. This allows you to select the plumbing arrangement best suited for your washroom.

A variety of options are available to tie into the Alavo system you have chosen. Depending on the option you choose, a slider will pop up to toggle between the widths. Choose between:

• Matching system width (same width as the mirror)
• Extend both ends
• Extend ends separately
• No vanity surface

Select a vanity surface type with eclipse shadow gap or eclipse easy access panel. Why not add a splashback or a bin chute too?

View the summary of your selection and submit your details to enable the system to generate your specification. Keep in mind that the detail and official drawings are always confirmed later on.